Description/Excerpt:
This web page contains most interesting FAQs covered.
Source:
CatiaTutor.com
Over 50,000 3D CAD Tips & Tutorials. 3D CAD News by applications and CAD industry news.
Description/Excerpt:
This web page contains most interesting FAQs covered.
Source:
CatiaTutor.com
Description/Excerpt:
The web page contains most common FAQs and rare topics covered.
Source:
CatiaTutor.com
Description/Excerpt:
How do I create .exe file in Pro/E?***Free Registration Required***
Source:
ProE Community
Description/Excerpt:
PCB design using IDF files and tool from Simplified Solutions.
Source:
PTC Express
Description/Excerpt:
Top-Down Design methodology in Pro/E takes care of every level in a project, Pro/E Tip of the Month.
Source:
Synthesis Engineering Services
Description/Excerpt:
I am looking for an independent review of Pro/ENGINEER Piping Design. Can anyone in this forum give me any information on it? Does anyone know of a company that uses it? All opinions greatly appreciated however small they may be.
Source:
3DCADTips Pro/ENGINEER Forum
Description/Excerpt:
Can anyone give me a list of the default parameters used in Pro/E Modeling, Drawing etc.(cur_row, hole_number etc.)
Thanks in advance. Please reply even if you know that something like this exists.
Source:
3DCADTips Pro/ENGINEER Forum
Description/Excerpt:
Pro/ECAD is an optional module providing a platform for data exchange between Pro/ENGINEER and systems for Electrical Computer Aided Design (ECAD). These systems produce data in Intermediate Data Format (IDF). This tip is concerned with the import of a printed circuit board outline in IDF format.
Source:
PTC Express
Description/Excerpt:
This is an issue that many people may never run into, but if you do you`ll realize it`s not fun! The problem comes about when you are using dependant views and you have reference sections pointing to another view and you modify the section mark in it`s length and/or head/tail location. If you place a reference section and say stretch it out, or need to change the head to the other side, the section will revert back to it`s original placement location (before you made any changes to it) as soon as you adjust the crop region in the dependant view. Please take a look at the attached video for a visual of the issue. This is from an actual project where the person had a lot of referenced sections. The video zooms into the dependant view so you can see the sections changing as the crop region was adjusted.
Source:
Revit ArchCenter
Description/Excerpt:
Hello everybody,
In our company we use punching and bending machines to produce sheet metal products. Our CAD software is inventor 11 and we are very satisfied. However, our CAM software for the punching and bending machines is TRUMPH`S software called TOPS 300 and TOPS 600 respectively. At the time our CAD/CAM process in the R&D department is the following. We design our assemblies in Inventor 11 and we export the drawings as dxf files. Afterwards, we use the TOPS CAM software. Therefore, when changes must occur in the inventor files we must delete the old dxf file and export a new drawing. This is a major problem because version mistakes may happen.
Does anyone know a CAM software for bending and punching machines that can be linked with inventor 11 to make the whole process more automated??
Source:
3DCADForums – Inventor Forum